Mechanical Processing and Material Science: What is the most suitable cutting software for different materials?

Processing of fixed stones. In this note, we will check the method of processing Aluminium alloys, Stainless steel, Chitin alloys and Engineering Plasma Chips to optimise the results by selecting the appropriate tools, cutting oils and paramecium.

MachiningGamakudo is a tool that requires a deeper understanding of material properties than the equipment and the material plan. If the material is different, the processing behaviour will be very different, and the processing strategy of the "ODOMED" is necessary.

Machining characteristics and countermeasures for general materials Aluminium alloy Characteristics: Flexibility, adhesion, and good thermal conductivity. Topic: Influence of cutting work on the surface of the finishes. Problems:鋭鋭鋭鋭ポジティブロントアングル工具的使用、高速、大送り、ナイフに材料が付着するのぐぐためのクーラント的使用。 Characteristics of Stainless Steel: High Strength, FUJITSU TEN and Low Heat Conductivity. Problem: Work-hardening is aggressive, and wear of tools is early. Solution: Use FUJITSU TEN TEN TEN tools, avoid "chipping" of the tools, maintain proper feeding, and ensure proper cooling. Characteristics of Chitin alloy: High strength, light weight, high chemical activity, very low thermal conductivity.

Topic: The temperature of the cutting zones is very high, the tool material is chemically reactive and there is a risk of rapid damage to the tool. Solution: Low cutting speeds, continuous feeding, use of high-pressure cranks, and sharp edges. There are many special chitin processing tools that are necessary. Characteristics of Engineering Plasma Chips: Elasticity is low, heat transfer rate is low. Problem: Deformation and the effect of springback are affected, heat dissipation is difficult, and there is a possibility of melting of the material. Solution: Use a sharp cutting edge鋭,speed,delivery,smaller,and応じて空冷または空空冷却,if necessary.

General principle of optimisation Tool selection: Selection of tool material (e.g. super-hard, CBN, ダイヤモンド) and coated material should be made correctly. Cutting oil剤：Coolingだけでなく、lubrication and chip removal are used. Stability：Works are actually clamped, and the whole system (machine, tool, jig, and workpiece) is very rigid.

Knowledge of Materials ScienceMachiningThis is a very important feature of the general purpose opeltargets and proxies for professional use. Correct machining is the core of upgrading processing efficiency, part quality, and economic efficiency.